Choosing a Quad Lock Mount for Cycle Commuting and Training
By Quad Lock USA® - Official Store | Published: 2026-10-15
Category: Buying Guides
Match your Quad Lock setup to how you actually ride: a secure commuting mount, waterproof charging, or a handlebar-free option for training days.
Quick answer
For most cycle commuters, pair a Quad Lock handlebar or stem mount with the Waterproof Wireless Charging Head so navigation and charging survive rain and long rides. If you only ride in dry conditions or already carry a battery pack, the standard mount head is the simpler choice. Riders who want a cleaner cockpit or a smaller footprint should look at the 360 Concealed Base, while anyone mounting a camera or light instead of a phone needs the Quad Lock to Action Camera Adaptor.
Start with how your bike is set up, not the mount
The mount that works best depends on what your handlebars and stem look like. Drop-bar road bikes usually have limited bar space once a light, bell, or computer is fitted, so a smaller base or a stem-mounted option keeps the cockpit usable. Flat-bar commuters and hybrids often have more room, which makes a handlebar mount with a charging head practical. If your mirror stem or scooter-style bars are the only clear spot, the Mirror Stem Mount solves that specific problem instead of forcing a bar clamp where there is no space.
Match the mount head to your weather and ride length
The mount base holds the phone; the head decides how the phone attaches and whether it charges. For daily commuting in mixed weather, a waterproof wireless charging head removes the need to plug in at the bar and keeps the phone topped up while navigating. For short dry rides, a standard head is lighter, cheaper, and one less thing to think about. There is no single correct answer here, so pick based on your longest regular ride and your local forecast, not the best-case day.
Plan for cameras, lights, and accessories before you buy
If you also run a GoPro or action camera, the Quad Lock to Action Camera Adaptor lets you reuse the same twist-and-lock mounting instead of adding a second clamp. It is recommended for use with Lever Heads for secure mounting, and it is not recommended with a Vibration Dampener because that can increase camera shake. Decide whether your priority is phone navigation or camera capture, because the two setups pull in slightly different directions.
Decision rules for your cycling setup
- Ride in rain or ride long: Choose a waterproof wireless charging head so the phone stays charged without a cable at the bar. If most of your rides are under an hour and dry, a standard head is enough.
- Tight cockpit or drop bars: Use a small-footprint base or a stem or mirror-stem mount to free up bar space for lights and computers. Measure your available bar space before ordering a larger clamp.
- You also run a camera or light: Add the Quad Lock to Action Camera Adaptor and use Lever Heads; skip the Vibration Dampener with a camera. One mounting system can cover phone and camera, but not every accessory combination is recommended.
Product facts that affect your choice
- Cycling - Waterproof Wireless Charging Head: Waterproof Wireless Charging Head combines secure dual-stage twist lock with waterproof wireless charging, and is IP67 rated. Best for commuters and long rides where rain and battery drain are both realistic concerns.
- Quad Lock 360 Base - Concealed Small: Quad Lock 360 Base - Concealed Small uses a small footprint with a cover to conceal screws, and a Concealed Cable version lets a cable pass through the base. Useful when bar space is tight or you want a cleaner look, and the cable version helps if you prefer wired charging.
- Accessory - Quad Lock to Action Camera Adaptor: Quad Lock to Action Camera Adaptor attaches GoPro, action cameras, or lights using Quad Lock twist lock mounting, is recommended with Lever Heads, and is not recommended with a Vibration Dampener. Lets you reuse one mounting system for camera or light, but follow the Lever Head and no-dampener guidance to avoid extra camera shake.
- Scooter/Motorcycle - Mirror Stem Mount: Scooter/Motorcycle - Mirror Stem Mount has a patented dual-stage lock, an adjustable gimbal head, and a diecast aluminium body. A fit solution when handlebar space is unavailable and the mirror stem is the only stable mounting point.
Who this setup fits
Best for
- Commuters who ride in mixed weather and want navigation plus charging at the bar
- Riders with limited handlebar space who need a small or stem-based mount
- Cyclists who also mount a GoPro, action camera, or light and want one mounting system
Not for
- Riders who only need a phone holder for short dry rides and do not want charging
- Anyone expecting a camera adaptor to work with a Vibration Dampener
- Bikes with no usable handlebar, stem, or mirror stem mounting point
