Start with the Power Source You Already Have
Before you buy or route anything, identify where the electricity will come from. The Quad Lock Cycling Power Cables are built to connect the Quad Lock Waterproof Wireless Charging Head to a compatible e-bike or a portable power bank. That means the first decision is not about cable length or color—it is about which connector your bike or battery accepts.
The cables come in three variants: Bosch Smart System, Shimano And Other Drive Units, and USB C. Pick the one that matches your drive unit or power bank, then plan the route from that source to the charging head.
What the Cycling Power Cable Connects
- Cycling - Power Cables: Connect the Quad Lock Waterproof Wireless Charging Head to your compatible e-bike using our Bosch or Shimano connector cables. Or use the USB C cable to connect to portable power bank. This confirms the cable is a link between the charging head and a power source, not a standalone charger. Your e-bike or power bank must already provide the power.

Cycling - Power Cables - Cycling - Power Cables: Minimum 10W QC3.0, recommended 18W or higher. This is the power requirement for the charging head. Check that your e-bike output or power bank meets it before expecting reliable charging.
Choose the Variant That Matches Your Bike or Battery
If your e-bike uses a Bosch Smart System, the Bosch Smart System variant is the direct fit. For Shimano and other drive units, the Shimano And Other Drive Units variant is designed for that connection. If you are not wiring into the bike at all, the USB C variant lets you plug into a portable power bank instead.
There is no universal connector here. The cable you choose must match the port on your drive unit or power bank. If you are unsure which system your bike uses, check the drive unit branding or the port shape before ordering.
Route the Cable from Source to Mount
Routing is about keeping the cable secure, out of moving parts, and free of sharp bends. The exact path depends on your frame and mount location, so use these steps as a checklist rather than a fixed diagram.
- 1. Identify both endpoints: Locate the charging port on your e-bike drive unit or the USB C port on your power bank, and the input on the Quad Lock Waterproof Wireless Charging Head. Confirm the cable variant matches both.
- 2. Plan a slack-friendly path: Follow the existing brake or gear cable lines where possible. Leave a small amount of slack at the charging head so the mount can move slightly without pulling the connector.
- 3. Avoid moving and hot areas: Keep the cable clear of suspension pivots, steering range, and hot components. Secure it with zip ties or frame-friendly clips, but do not overtighten.
- 4. Check power before the first ride: Connect everything and confirm the charging head powers on. If it does not, verify the power source meets the minimum 10W QC3.0 requirement and that the connector is fully seated.
Power Bank vs E-Bike Wiring: Which Route Fits Your Ride?
E-bike wiring keeps everything integrated and avoids carrying a separate battery, but it ties you to that bike and requires a compatible drive unit. A USB C power bank is more flexible: you can move it between bikes or use it on a rental, but you need to secure the bank and manage an extra cable.
For commuters with a Bosch or Shimano e-bike, the integrated route is usually cleaner. For riders who swap between bikes or want charging on a standard bicycle, the USB C variant with a power bank is the practical choice.
What to Check Before You Buy
Confirm three things: your drive unit or power bank connector type, the output wattage (10W QC3.0 minimum, 18W or higher recommended), and whether you already own the Quad Lock Waterproof Wireless Charging Head. The cable does not include the charging head, so it only solves the connection problem.
Also consider cable length and routing space. The supplied information does not list cable lengths, so measure your intended route and check the product listing for dimensions before ordering if length is critical.

