How to Install a Quad Lock Motorcycle Mount on Any Bike
By Quad Lock USA® - Official Store | Published: 2026-10-17
Category: How-to Guides
Step-by-step guide to installing a Quad Lock motorcycle mount on any bike. Covers handlebar setup, alignment, and common mistakes to avoid.
Quick answer
To install a Quad Lock motorcycle mount, attach the mount to your handlebar using the included rubber shim and tighten the clamp securely. Align your phone case with the mount head, and test the lock mechanism before riding. The entire process takes about 10 minutes with basic tools.
What You'll Need
Before starting, gather your Quad Lock motorcycle mount kit, a compatible phone case (like the MAG Case), and a flathead screwdriver or Allen key (depending on your mount model). Most kits include a rubber shim for handlebar diameters from 0.5 to 1.25 inches. If your bike has thicker bars, you may need an optional shim pack.
Choosing the Right Mount Position
Pick a spot on your handlebar that doesn't interfere with brake levers, clutch, or throttle movement. The mount should be within easy reach but not block your view of the speedometer. A common mistake is mounting too close to the grips, which can make it hard to operate controls. Leave at least two inches of clearance on each side.
Compatibility Check
Quad Lock mounts work with most motorcycles, scooters, and e-bikes. However, if your handlebar has a non-standard shape (like oversized or tapered bars), verify that the clamp can grip securely. The included rubber shim helps fill gaps on standard round bars. For unusual shapes, consider a different mounting solution.
Installation Steps
- Step 1: Attach the mount to the handlebar: Open the clamp and place it around your chosen handlebar section. Insert the rubber shim if needed to fill any gap. Tighten the clamp screw until the mount is snug but not fully locked yet. Common mistake: over-tightening can crack the clamp or strip the screw. Tighten just enough so the mount doesn't rotate under light pressure.
- Step 2: Adjust the angle: Rotate the mount head so it faces you when you're seated in your normal riding position. The phone should sit upright and slightly tilted toward you for easy viewing. Checkpoint: sit on the bike and simulate a ride. If the mount blocks your view of the road or instruments, adjust the angle before final tightening.
- Step 3: Lock the mount and test: Place your phone (with the Quad Lock case attached) onto the mount head. Twist it clockwise until you hear a click, confirming it's locked. Give the phone a gentle tug to ensure it's secure. Verdict: If the phone wobbles or the mount shifts during a test shake, re-tighten the clamp and re-check the alignment. Never ride without a secure lock.
Product Facts
- MAG Case - USA Ring: Customize the look of your Quad Lock MAG™ Case with a USA Flag MAG Ring. Easily change your existing MAG Ring by inserting the USA ring option. Only compatible with Quad Lock MAG Cases. If you want to personalize your phone case while keeping full magnetic compatibility with your motorcycle mount, the MAG Case - USA Ring offers a quick visual swap without affecting performance.
