Back to Blog
Tips & Care 2026-11-18 Quad Lock USA® - Official Store 1 views

PRO Screw Set Black: When to Replace Motorcycle Mount Screws

PRO Screw Set Black: When to Replace Motorcycle Mount Screws

Loose or missing mount screws don't always mean a new mount. Learn when a fresh PRO Screw Set Black is the right fix and which sizes you get.

Loose screws: replace the hardware or the whole mount?

A rattling phone mount usually points to the fasteners, not the mount body. Before you buy a new mount, check whether the screws are simply loose, missing, or worn. If the mount itself is intact, a replacement screw set is often the cheaper, faster fix.

The PRO Screw Set Black is a collection of socket head and countersunk screws in common M4 and M5 sizes. It is designed for replacing lost or damaged screws on Quad Lock motorcycle mounts, but the supplied information does not confirm which specific mount models or positions each screw fits. Use the sizes below to match what you are replacing.

Signs your mount screws need attention

  • The mount shifts or rattles over bumps: If the phone holder moves independently of the handlebar clamp, a loose or missing screw is a likely cause. Check all visible fasteners before assuming the mount is worn out.
  • A screw is missing after a ride: Vibration can work a fastener loose. If you notice a empty hole, replace the screw rather than leaving the mount short a fastener.
  • The screw head is stripped or damaged: A rounded socket head makes future adjustments difficult. Replacing it now avoids a bigger job later.
  • You are reinstalling a mount after a bar swap: Reusing old screws is not always reliable. A fresh set gives you clean threads and the right sizes on hand.

What the PRO Screw Set Black includes

  • Replacement - PRO Screw Set Black: 1 x M4 x 16mm Countersunk Head Screw and 1 x M5 x 12mm Socket Head Screw Covers a countersunk position and a short socket head position; check your mount for these head types before ordering.
    Replacement - PRO Screw Set Black
    Replacement - PRO Screw Set Black
  • Replacement - PRO Screw Set Black: 1 x M5 x 16mm, 2 x M5 x 20mm, 2 x M5 x 25mm, 1 x M5 x 30mm, 1 x M5 x 35mm, 1 x M5 x 40mm, 1 x M5 x 45mm, and 1 x M5 x 50mm Socket Head Screws The range of M5 lengths lets you match the screw you are replacing by measuring its length, not guessing.

How to match a replacement screw to your mount

The set gives you options, but you still need to pick the right one. Work from the screw you are replacing rather than from the mount model name.

  1. Identify the thread size: The set contains M4 and M5 screws. If your existing screw is a different size, this set is not the right match.
  2. Measure the length under the head: Match the length to the sizes listed: M4 x 16mm, or M5 in 12, 16, 20, 25, 30, 35, 40, 45, or 50mm.
  3. Check the head type: The set includes one countersunk head screw (M4 x 16mm) and socket head screws for the rest. A countersunk screw sits flush; a socket head sits above the surface. Use the same type as the original.
  4. Test fit before riding: Thread the screw in by hand first. If it binds, stop and recheck the size. The supplied information does not include torque specifications, so consult your mount's instructions for tightening.

When a screw set is not enough

If the mount body is cracked, the clamp is deformed, or the screw hole itself is damaged, new screws will not solve the problem. In that case, the mount needs replacement or professional inspection. The PRO Screw Set Black is intended for fastener replacement, not structural repair.

Also note that the supplied information does not confirm compatibility with every Quad Lock motorcycle mount or every mounting position. If you are unsure which screw your mount uses, compare the sizes in the set to the screw you removed. When in doubt, contact Quad Lock support before ordering.

A practical spare to keep on hand

Even if nothing is loose today, a spare screw set is useful for routine maintenance or unexpected losses. The PRO Screw Set Black covers a range of common M4 and M5 sizes in one pack, so you are not stuck waiting on a single replacement screw. Check your mount's fasteners periodically and replace any that show wear before they become a ride-ending problem.

Related Articles

Customer Service
Home
Products
Cart
Profile