Quad Lock -ilmanvaihtotelineen asennusopas kuorma-autoon
By Quad Lock USA® - Official Store | Published: 2026-10-19
Category: Ohjeet
Opi asentamaan Quad Lock -ilmanvaihtoaukon pidike kuorma-autoosi minuuteissa. Vaiheittaiset ohjeet, yleiset virheet ja vinkit puhelimen turvalliseen kiinnitykseen autossasi.
Quick Answer
Installing the Quad Lock Truck Vent Mount takes about two minutes. You just clip the hook onto a horizontal vent blade, tighten the thumbscrew, and attach your phone case or universal adaptor.
Why the Vent Mount Works for Trucks
Truck cabs often have limited flat dashboard space, making a vent mount a practical choice. The Quad Lock Vent Mount uses a clever hook design that grips standard horizontal vent blades securely, keeping your phone within easy reach without blocking your view of the road.
One thing to check before you start: the Vent Mount is not compatible with 360-degree gimbal vents. If your truck has those round, rotating vents, you will need a different mounting solution like the Quad Lock Dashboard Mount.
What You Need Before You Start
You will need the Quad Lock Truck Vent Mount itself and a Quad Lock Case or Universal Adaptor attached to your phone. No tools are required. The mount comes with a thumbscrew that tightens by hand, so you can adjust or remove it without any hardware.
If you plan to switch the mount between vehicles, keep the thumbscrew loose enough to remove easily but tight enough to hold firm while driving.
Installation Steps
- 1. Position the mount on a vent blade: Hold the Quad Lock Vent Mount so the hook faces the vent. Slide the hook behind a single horizontal vent blade near the center of the vent assembly. The mount should sit level and not tilt. Avoid placing the hook on two blades at once — this can cause the mount to wobble or slip.
- 2. Tighten the thumbscrew: Turn the thumbscrew clockwise until it presses firmly against the back of the vent blade. Keep turning until the mount feels snug and does not slide when you gently push it. Do not overtighten — the mount should hold without bending the vent blade. If the mount still moves after tightening, the vent blade may be too thin or angled. Try a different blade or check compatibility.
- 3. Attach your phone: Line up the Quad Lock Case or Universal Adaptor on your phone with the mount head. Press the phone onto the mount until you hear a click and feel it lock into place. To remove, press the release button on the mount head and lift the phone off. Always confirm the lock is engaged before letting go of the phone — a loose connection can lead to drops over rough roads.
- 4. Adjust the viewing angle: Once the phone is mounted, tilt the vent louver up or down to adjust the screen angle. You can also rotate the phone 360 degrees on the mount head for portrait or landscape orientation. Be careful not to force the vent beyond its normal range — this can break the vent mechanism.
Product Details
- Truck - Vent Mount: The Quad Lock Vent Mount is suitable for use with all Quad Lock Cases and Universal Adaptors. You can use the same mount whether your phone has a dedicated Quad Lock Case or a Universal Adaptor, so switching devices or sharing the mount is straightforward.
Truck - Vent Mount
