MAG Bottle Mount McLaren Edition: Instalacja i użytkowanie
By Quad Lock USA® - Official Store | Published: 2026-10-27
Category: Poradniki
Dowiedz się, jak zainstalować i używać uchwytu na butelkę Quad Lock MAG Bottle Mount McLaren Edition na swoim motocyklu lub samochodzie. Przewodnik krok po kroku z poradami dotyczącymi bezpiecznego mocowania.
Quick answer
Installing the Quad Lock MAG Bottle Mount McLaren Edition takes about five minutes. Secure the mount to your handlebars or vent, attach the MAG ring to your bottle, and you're ready to ride.
Why the McLaren Edition stands out
The McLaren Edition of the Quad Lock MAG Bottle Mount features a distinctive Papaya sealing ring and McLaren logo, inspired by Formula 1 design. It offers the same reliable magnetic hold as the standard MAG mount, but with a look that appeals to racing fans.
Mounting location considerations
You can install the mount on motorcycle handlebars, bicycle handlebars, or a car vent using the included hardware. For motorcycles, choose a spot where the bottle won't interfere with controls. For cars, ensure the vent blades are sturdy enough to support the weight.
Installation and use steps
- Attach the mount to your handlebar or vent: Use the included hex key to loosen the clamp, slide it onto your handlebar (or vent clip for car use), and tighten until snug. Do not overtighten, as this can damage the mount or handlebar. Check that the mount doesn't rotate under pressure before securing fully.
- Apply the MAG ring to your bottle: Peel the adhesive backing from the MAG ring and press it firmly onto the center of your bottle's base. Wait 24 hours for the adhesive to cure before using the mount. A common mistake is using the mount before the adhesive cures, which can cause the ring to detach.
- Attach and remove the bottle: Simply bring the bottle near the mount—the strong magnets will pull it into place. To remove, twist and pull the bottle away. Avoid using excessive force, as the magnetic hold is strong but not unbreakable. Always ensure the bottle is fully seated before riding to prevent it from falling off.
Product details
- Accessory - MAG Bottle Mount - McLaren Edition: The McLaren Edition features an iconic Papaya sealing ring and McLaren logo, capturing a high-performance spirit in a sleek design. If you're a McLaren fan, this edition adds a touch of racing heritage to your gear without compromising on the mount's functionality.
Accessory - MAG Bottle Mount - McLaren Edition
