Tillbaka till bloggen
Gör-det-själv-guider 2026-11-18 Quad Lock USA® - Official Store 0 visningar

Concealed Small 360 Base: Placement on a Bike or Car

Concealed Small 360 Base: Placement on a Bike or Car

Plan where to mount the Quad Lock 360 Base - Concealed Small on a bike or car, choose between the two style variants, and know what to check before you drill.

Start with the surface, not the base

The Quad Lock 360 Base - Concealed Small is a mounting base for your smartphone with a small footprint. Because it is a base rather than a complete mount, the first decision is where a small, screw-fixed base can sit on your bike or car without interfering with the controls, cables, or trim around it.

The supplied product information confirms the base's footprint, its concealed cover, and the two style variants, but it does not list screw sizes, drill dimensions, or torque values. Treat those as details to confirm against your own surface and hardware rather than assuming them from the product page.

A placement routine for a bike or car

  1. Pick a flat, small landing area: The base is designed for a small footprint, so look for a compact flat spot on the cockpit, dash area, or panel where the base can sit without overhanging an edge.
  2. Check what sits behind the surface: A concealed base is fixed with screws, so confirm there is clear space behind the chosen spot for the screw tips and any cable route you plan to use.
  3. Choose the style that matches your cable plan: The Concealed style uses a cover to hide the screws. The Concealed Through Cable style adds a pass-through so a cable can run through the base for a cleaner look.
  4. Test the position before committing: Hold the base in place and check that the phone, once attached, will not block your view of the road, dash, or controls. The supplied information does not specify a viewing angle, so judge this on your own vehicle.
  5. Fit the cover last: Once the base is fixed, the supplied cover conceals the screws and gives the install a finished look.

Concealed vs. Concealed Through Cable

Both variants share the small footprint and the screw-concealing cover. The difference is whether you want a cable to pass through the base.

  • Concealed: Best when your charging cable will run separately to the phone. The cover hides the screws for a tidy finish.
  • Concealed Through Cable: Choose this when you want a cable to pass through the base itself, which the product describes as the way to keep the setup looking clean.

What the Concealed Small base gives you

  • Quad Lock 360 Base - Concealed Small: Mounts your smartphone with a small footprint. A small footprint widens the number of bike and car surfaces that can host the base without crowding controls or trim.
    Quad Lock 360 Base - Concealed Small
    Quad Lock 360 Base - Concealed Small
  • Quad Lock 360 Base - Concealed Small: Features a cover to conceal screws and give a quick look. The cover is the reason to choose a concealed base over an exposed one when the install will be visible.
  • Quad Lock 360 Base - Concealed Small: A Concealed Through Cable version lets a cable pass through the base. This is the deciding variant if you want charging routed through the mount rather than alongside it.

Bike vs. car: what changes in practice

On a bike, the base usually lands on a small area near the bars or cockpit, where space is tight and the phone needs to stay clear of your hands and the controls. On a car, the dash or console often offers a flatter, larger surface, but you still want the base away from airbag zones and anything that would put the phone in your line of sight while driving.

The supplied information does not include vehicle-specific fitting guidance, so use these as placement principles rather than manufacturer instructions. If a spot feels crowded or the base overhangs, look for another surface.

Checks before you drill

  • Hardware: The supplied record does not list screw sizes or included fasteners. Confirm the screws you plan to use suit the material you are fixing into.
  • Surface thickness: Because the screws are concealed by a cover, make sure the surface is thin enough for the screws to seat without protruding into anything behind it.
  • Cable route: If you are choosing the Through Cable variant, plan the cable path before you fix the base so the pass-through lines up with where the cable will run.
  • Phone clearance: Check that the mounted phone will not foul the bars, dash, or controls when attached.

When this base is the right choice

Choose the Quad Lock 360 Base - Concealed Small when you want a low-profile phone mount base with hidden screws and a neat finish on a bike or car. If you need a larger mounting surface or a base with different fixing options, the 360 range includes other base types, and the Quad Lock 360 Kit Builder is the place to compare them. The supplied information for this base does not confirm load ratings, weather resistance, or suitability for every surface, so check those against your own setup before you commit.

Relaterade artiklar

Customer Service
Hem
Produkter
Varukorg
Profil