Back to Blog
How-to Guides 2026-11-16 Quad Lock USA® - Official Store 0 views

Ball Top Cap Adaptor for 4x4 Kits: Fit and Setup Basics

Ball Top Cap Adaptor for 4x4 Kits: Fit and Setup Basics

Learn how a Quad Lock ball top cap adaptor fits your 4x4 kit, which ball size to pick, and how to set up the twist-lock or MAG mounting option.

Start with the socket arm you already have

A ball top cap adaptor is the small part that lets your Quad Lock mount attach to an existing 1" or 20mm socket arm. The key fit decision is matching the ball size to the socket arm already in your 4x4 setup. If you are unsure which size you have, measure the ball diameter on your current arm before ordering. The adaptor itself does not change the arm; it replaces the top cap so the Quad Lock mounting interface can sit on top.

The Ball Top Cap Adaptor 4x4 Car Kits - Universal Fit is available in 1" and 20mm versions, and each can be ordered alone or bundled with a MAG Head. That choice matters because the MAG Head only works with Quad Lock MAG Universal Adaptors and MAG Cases, while the standard ball top cap works with the familiar twist-and-lock mounting system.

What the adaptor connects to

  • Ball Top Cap Adaptor 4x4 Car Kits - Universal Fit: Combines with 1" or 20mm socket arms to mount your device in your vehicle. This is the core compatibility check: your existing socket arm determines whether you need the 1" or 20mm variant.
    Ball Top Cap Adaptor 4x4 Car Kits - Universal Fit
    Ball Top Cap Adaptor 4x4 Car Kits - Universal Fit
  • Ball Top Cap Adaptor 4x4 Car Kits - Universal Fit: No tools are needed for installation. You can swap or test-fit the adaptor without hunting for a wrench, which makes it easy to confirm the ball size before final assembly.

How to set up the adaptor on your 4x4 kit

The process is intentionally simple. Work through these steps in order, and pause at the socket-arm check if you have not already confirmed your ball size.

  1. Confirm your socket arm size: Look at the socket arm already installed in your vehicle. If it accepts a 1" ball, choose the 1" Ball Top Cap Adaptor; if it accepts a 20mm ball, choose the 20mm version. The product listing offers both, plus bundle options with a MAG Head.
  2. Remove the existing top cap: The adaptor replaces the top cap on your current mount. No tools are required for installation, so you can usually unscrew or unclip the old cap by hand. If your existing cap is held by a fastener you cannot remove by hand, stop and check your mount's own instructions before forcing anything.
  3. Fit the new ball top cap: Seat the adaptor onto the mount and secure it by hand. The familiar ball design is meant to make this quick with your existing setup. Do not overtighten; the goal is a snug fit that holds the arm without stressing the plastic.
  4. Attach your phone using twist-lock or MAG: With the standard ball top cap, attaching your phone is as easy as twist, lock. If you chose the MAG Head bundle, position your phone and let the magnets do the rest. Remember that the MAG Head is compatible only with Quad Lock MAG Universal Adaptors and MAG Cases.
  5. Adjust orientation and check clearance: The adaptor lets your phone sit discreetly in either portrait or landscape mode. Before you drive, rotate the phone through both orientations and confirm the arm and phone clear your dashboard, controls, and view of the road.

Standard ball top cap vs MAG Head bundle

Both versions use the same ball-and-socket connection to your 4x4 kit. The difference is how your phone attaches to the mount.

  • Standard Ball Top Cap Adaptor: Uses the twist-and-lock mounting system. Your phone needs a compatible Quad Lock case or universal adaptor. This is the familiar setup if you already use Quad Lock twist-lock mounts elsewhere.
  • Ball Top Cap Adaptor + MAG Head: Adds magnetic attachment on top of the ball mount. Position your phone and the magnets hold it. This option requires a Quad Lock MAG Universal Adaptor or MAG Case; it will not work with a standard non-MAG case.

What to check after installation

Once the adaptor is fitted, give the arm a gentle press and pull to confirm the ball is seated. Then attach your phone and check that the twist-lock or MAG connection engages fully. The adaptor is designed to reduce the size of your current mount so the phone sits discreetly, but that also means you should verify the phone does not contact the dashboard or block any controls when in portrait or landscape.

Because the supplied information does not include load ratings or specific torque values, avoid guessing. If your socket arm has its own tightening instructions, follow those. If you are switching between the standard cap and a MAG Head, keep the unused cap and any small parts in a safe place so you can change setups later.

Product facts for your decision

  • Ball Top Cap Adaptor 4x4 Car Kits - Universal Fit: Available variants include 1" Ball Top Cap Adaptor, 20mm Ball Top Cap Adaptor, and bundles with a MAG Head. You can buy the exact ball size you need, and choose the MAG bundle only if you already use or plan to use MAG cases or adaptors.
  • Ball Top Cap Adaptor 4x4 Car Kits - Universal Fit: The adaptor is designed to reduce the size of your current mount so your phone sits discreetly in portrait or landscape mode. This helps set expectations for how the finished install will look and why clearance checks matter.
  • Ball Top Cap Adaptor 4x4 Car Kits - Universal Fit: MAG Head is compatible with Quad Lock MAG Universal Adaptor and MAG Cases only. This is the single most important compatibility note if you are considering the MAG bundle.

Related Articles

Customer Service
Home
Products
Cart
Profile