Back to Blog
How-to Guides 2026-11-17 Quad Lock USA® - Official Store 0 views

Quad Lock to Action Camera Adaptor: Fit and Setup Guide

Quad Lock to Action Camera Adaptor: Fit and Setup Guide

Learn what the Quad Lock to Action Camera Adaptor connects, which mounts it works with, and how to swap your GoPro or action camera between Quad Lock setups safely.

What the adaptor actually does

The Quad Lock to Action Camera Adaptor is a small bridge between two systems: your Quad Lock twist, lock mount and a GoPro, action camera, or light. Instead of buying a separate camera mount for every bike, bar, or tripod, you fit the adaptor and move the camera between the Quad Lock mounts you already use.

That is the whole job. It does not add power, wireless control, or camera-specific electronics. The supplied information describes a mechanical connection only, so treat it as a mounting accessory rather than a camera upgrade.

The fit facts that matter before you buy

  • Accessory - Quad Lock to Action Camera Adaptor: Use Quad Lock twist, lock mounting with your GoPro, Action Camera or lights. This tells you the adaptor is intended for camera and light accessories, not for phones or other devices.
    Accessory - Quad Lock to Action Camera Adaptor
    Accessory - Quad Lock to Action Camera Adaptor
  • Accessory - Quad Lock to Action Camera Adaptor: Recommended to use only with Lever Heads for secure mounting. If your Quad Lock setup uses a different head style, the supplied guidance points you toward a Lever Head first.
  • Accessory - Quad Lock to Action Camera Adaptor: Not recommended to use with a Vibration Dampener as this may increase camera shake. A dampener that helps a phone can work against a lightweight action camera, so plan your setup without one.
  • Accessory - Quad Lock to Action Camera Adaptor: Quick to attach and detach with Quad Lock twist, lock mounting. The adaptor is designed for swapping a camera between mounts rather than leaving it permanently attached.

How to set it up on a Quad Lock mount

  1. Check your head style: Confirm you are using a Lever Head, which the supplied guidance recommends for secure mounting. If you are not sure which head you have, identify it before attaching the adaptor.
  2. Leave the Vibration Dampener off: The adaptor is not recommended with a Vibration Dampener because it may increase camera shake. Build the stack without one.
  3. Attach the adaptor to the mount: Use the Quad Lock twist, lock action to seat the adaptor on the mount. The supplied information describes a quick attach and detach process.
  4. Fit your camera or light: Connect your GoPro, action camera, or light to the adaptor side. The supplied information confirms the adaptor is intended for these accessories but does not list a specific camera model or thread standard, so check your camera's own mounting interface before relying on it.
  5. Twist to remove when you are done: Release the adaptor with the same twist, lock motion. This is what makes it practical to move one camera between several Quad Lock mounts.

Where the adaptor earns its place

The clearest use case is a camera you move often: from a handlebar mount to a tripod, or from one bike to another. Because the adaptor uses the same Quad Lock twist, lock interface, swapping the camera between mounts is simple once the adaptor is fitted.

It also lets a light share the same mounting system as your camera, so you are not juggling two different clamp designs on the same bar.

Adaptor setup vs. a dedicated action camera mount

A dedicated action camera mount is built around one camera system. The Quad Lock adaptor is built around one mounting system. Which one suits you depends on how many mounts and devices you already own.

  • Choose the adaptor if: You already run Quad Lock mounts and want to move a GoPro, action camera, or light between them without adding a second mounting standard.
  • Choose a dedicated camera mount if: You want a camera-specific fit and do not need to share mounts with other accessories. The supplied information does not confirm a universal camera interface on the adaptor, so a dedicated mount may be the safer route for an unusual camera.

What the supplied information does not confirm

The product record does not list a specific camera model, thread size, or load rating. It also does not describe installation tools or torque values. Those are decision limits, not product faults: if your camera has an unusual mounting interface or you plan to carry a heavy lighting rig, verify the physical fit before you commit.

The adaptor is offered in a Standard variant. No other variants are listed in the supplied information.

Related Articles

Customer Service
Home
Products
Cart
Profile