How to Use an iPhone Poncho for Wet-Weather Mounted Riding
By Quad Lock USA® - Official Store | Published: 2026-11-01
Category: Tips & Care
Learn how to fit and use the Quad Lock Poncho for iPhone to keep rain, mud, and dust off your screen and ports while your phone stays mounted.
Quick answer
Slip the Quad Lock Poncho over your iPhone before you ride in rain, mud, or dust. It covers the screen and ports while your phone stays on the mount, and you can stow it in a pocket when conditions dry out.
When a poncho helps and when it doesn't
A poncho is a barrier for your screen and ports, not a waterproof case. It is most useful when your phone is already in a Quad Lock case and mounted where it faces rain or road spray. If you need full submersion protection, a poncho alone is not the right tool.
Because the poncho is made of TPU, it adds a thin layer over the touchscreen. Expect touch response to feel slightly different, especially with wet or gloved fingers. Test your phone's touch sensitivity with the poncho on before you rely on it for navigation in heavy rain.
Fit check before you head out
The poncho is designed for specific iPhone models, so confirm you select the correct device option. A loose fit lets water pool at the edges, while a tight fit can make the poncho hard to remove. Do a dry run at home: install the poncho, press the buttons, and check that the screen responds.
Step-by-step: fitting and using the poncho
- Mount your phone first: Attach your iPhone in its Quad Lock case to the mount before adding the poncho. This ensures the case locks securely without interference from the poncho material. Check that the case is fully engaged and the phone does not wobble.
- Slip the poncho over the phone: Stretch the poncho starting from the bottom corners, then work it over the top. Make sure the screen area is smooth and the edges sit flat against the case. Avoid trapping air bubbles under the screen; smooth them out with your finger.
- Test touch and buttons: With the poncho on, unlock your phone and tap around the screen. Press the side buttons and check that they still respond. If touch is unreliable, remove and re-seat the poncho. If buttons are hard to press, the poncho may not be fully seated; adjust before riding.
- Ride and monitor: During wet rides, check periodically that the poncho has not shifted. If water pools on the screen, pull over and shake it off. Do not use sharp objects to clear water. Stop riding if the poncho becomes loose or water reaches the ports.
- Remove and dry after use: Take the poncho off, rinse with fresh water if it is muddy, and pat dry with a soft cloth. Store it flat or loosely folded in a pocket or bag. Avoid storing the poncho wet inside a closed bag to prevent mildew.
Product facts
- Ponchos - iPhone: Made from tough TPU to keep your iPhone screen and ports safe from mud, dust, and rain. This material provides a durable barrier that can be reused and stowed in a pocket when not needed.
Ponchos - iPhone
