MAG Case Colored Rings: How to Swap and Match Your Style
By Quad Lock USA® - Official Store | Published: 2026-11-03
Category: Tips & Care
Swap the MAG Ring on your Quad Lock MAG Case in a few minutes. Follow these steps to remove the black ring, seat a colored one, and match it to your everyday look.
Quick answer
Use the removal tool that comes with the MAG Ring to lift out the pre-installed black ring, press the colored replacement into the same recess, and check that it sits flush before you mount the phone. The swap takes minutes and needs no other tools.
Why the ring is worth swapping instead of replacing the case
The MAG Ring is the visible accent on the back of a Quad Lock MAG Case, so changing it is the cheapest way to refresh the look without buying a second case. It also lets one case move between outfits or setups: a neutral ring for work, a brighter one for weekends.
The trade-off is that the ring is a small cosmetic part, not a protective layer. A colored ring changes appearance only; it does not add grip, drop protection, or magnetic strength beyond the standard MAG Ring design.
When a ring swap is the wrong fix
If your current ring is loose, cracked, or sitting unevenly, a new ring may not solve the problem on its own. Inspect the recess on the case first: a damaged seating area will not hold any ring flush. In that situation, address the case before buying a color change.
Also skip the swap if you rely on the exact factory look for resale or warranty reasons. Once you remove the original ring, you cannot restore it perfectly unless you keep it stored flat and clean.
Step-by-step ring swap
- Power down and clear the case: Remove your phone from the MAG Case and set it aside on a soft surface. Work on a clean, well-lit table so the small ring and tool cannot roll away. Checkpoint: the case should be empty and flat before you touch the ring.
- Lift the black ring with the included tool: Slide the removal tool under the edge of the pre-installed black MAG Ring and lift gently around the circumference. Work slowly rather than prying at one point. Common mistake: forcing the tool too deep can scratch the case recess; stop if you feel resistance.
- Clean the ring recess: Wipe the empty recess with a dry, lint-free cloth to remove dust or adhesive residue. Let the surface dry completely before seating the new ring. Checkpoint: no grit or moisture should remain where the new ring will sit.
- Align and press the colored ring into place: Set the colored MAG Ring into the recess, checking that any alignment features match the case. Press evenly around the full ring with your thumb until it seats. Common mistake: pressing only one side can leave the opposite edge raised; run a fingertip around the seam to confirm it is flush.
- Test the fit before mounting: Reinstall your phone in the case and attach it to your usual MAG mount. If the ring feels proud or the phone does not sit flat, remove the ring and reseat it. Checkpoint: a correctly seated ring should not catch on the mount or rock when pressed.
Product facts
- MAG Case - Colored Rings: Each MAG Case - Colored Rings set includes one MAG Ring and one MAG Ring removal tool. You get the matching tool in the box, so you can complete the swap without hunting for a pry tool.
MAG Case - Colored Rings - MAG Case - Colored Rings: Quad Lock MAG Cases arrive with a Black MAG ring pre-installed. You already have a spare black ring after the first swap, which makes it easy to switch back later.
